Chongqing factory floor paint floor paint construction project team

Chongqing factory floor paint floor paint construction project team
Sand from the gray concrete floor treatment: for ground one, from the gray concrete floor from sand, cement mortar floor 2, from the gray terrazzo floors 3, 4 from the ashes of emery ground, from the ashes of two self-leveling cement floor, construction Steps: for from the ash from the sandy ground of the base surface requirements: (1) to ensure complete drying, cleaning dust, old paint, latex paint and other fixtures must be completely removed. (2) If the ground from the sand serious, you can start watering moist until dry and then construction. (3) If the ground has been oils (such as cooking oil, lubricants, etc.) serious pollution, it can not be applied directly. 2, concrete floor from the sand treatment agent Part A: 1) according to conditions on the ground floor from the sand cement agent Part A plus the amount of water diluted spray on the ground, liquid dosage: 0.1-0.5kg / square meter. (2) When the surface is no clear water or become sticky, timely spraying a small amount of water to keep the surface moist to promote penetration, the above operation lasted about four hours, and finally rinse with plenty of water surface, and remove the surface out of water, dried for 24 hour or more; (3) if the ground strength is poor, you should repeat the above steps for 24 hours. 3, the concrete floor from the sand treatment agent Part B: 1) liquid spray Part B, with about 0.2-0.7kg / square meter; (2) when no clear water surface should promptly sprayed a small amount of water, keep moist for about 4 hours, and finally rinse with plenty of water (preferably while flushing side with a stiff scrub brush), and clear the surface out of water, natural drying. 2,3 step above construction, preferably in an electric washing machine with high-power suction machine, higher efficiency, better apparent effect. Third, the construction tools: washing machine, suction machine, aids Fourth, the construction temperature: 2 ℃